When Were Contact Lenses Invented?
When Were Contact Lenses Invented? Some say German glassblower F.A. Muller used Herschel’s ideas to create the first known glass contact lens in 1887. Other reports say the first contact lenses were made by Swiss physician Adolf E. Fick in 1887, but were not successful and Paris optician Edouard Kalt created and fitted the first glass contact lenses to correct vision problems in 1888.
During the early part of this century opticians tried to produce extremely thin shell—like lenses to fit closely over the eye. An impression was taken of the eye and a glass shell made which, with a suitable fluid under it, covered most of the eye.
After 1938, plastic was used instead of glass, and in about 1960, smaller lenses were introduced which covered only the cornea and floated on a layer of tears. These lenses, only 7 to 11 mm in diameter and 0.1 to 1 mm thick can usually be worn all day without being removed. Besides being invisible, contact lenses provide a much wider field of vision than spectacles.
They are more practical for use in active sports because they are not easily lost or broken, and they can be tinted for use as sunglasses. But contact lenses are not effective in all cases of eye trouble. They are also expensive, and some people find difficulty in learning to wear them. As research continues, even smaller and more flexible lenses are being developed.
Though contact lenses seem to be a recent phenomenon, the famous Italian architect, mathematician and inventor Leonardo da Vinci (1452-1519) produced the first known sketches (in 1508) that suggested the optics of the human eye could be altered by placing the cornea directly in contact with water.
But it’s true that when contact lenses were invented for real came much later. Many believe da Vinci’s ideas eventually led to the development of contact lenses more than 350 years afterward.
In 1827, English astronomer Sir John Herschel proposed the idea of making a mold of a person’s eyes. Such molds would enable the production of corrective lenses that could conform to the front surface of the eye. But it was more than 50 years later that someone actually produced such lenses, and there is some controversy about who did it first.
Early glass contact lenses were heavy and covered the entire front surface of the eye, including the “white” of the eye (the sclera). Because these large “scleral” lenses severely reduced the oxygen supply to the cornea, they could be tolerated for only a few hours of wear and failed to gain widespread acceptance.
In 1936, New York optometrist William Feinbloom (1904-1985) introduced scleral lenses made of a combination of glass and plastic that were significantly lighter than older glass-blown contacts.
In 1948, California optician Kevin Tuohy (1919-1968) introduced the first contact lenses that resembled modern gas permeable (GP) contact lenses of today. These all-plastic lenses were called “corneal” contact lenses because they were smaller in diameter than previous contact lenses and covered only the clear front surface of the eye (the cornea).
These early hard lenses were made of a non-porous plastic material called polymethyl methacrylate (PMMA). Though PMMA hard lenses were not gas-permeable, they were fitted so they could move with each blink, so oxygen-carrying tears could be “pumped” under the lens to keep the cornea healthy.
Properly fitted, corneal PMMA contact lenses could be worn for 16 hours or longer. Advances in lens manufacturing techniques and fitting expertise among eye doctors led to the mass appeal of these hard plastic contact lenses in the 1950s and 1960s. Perhaps the biggest event in the history of contact lenses was the invention of the first hydrophilic (“water-loving”) hydrogel soft contact lens material by Czech chemists Otto Wichterle and Drahoslav Lim in 1959.
Wichterle and Lim’s discovery led to the 1971 launch of the first FDA-approved soft contact lenses in the United States — Bausch + Lomb’s “SofLens” brand contacts. Because of their greater comfort, soft contacts soon became more popular than hard contact lenses made of PMMA. Today, despite the availability of rigid gas permeable contacts that often provide sharper vision than soft lenses and extremely good oxygen permeability, more than 90 percent of contact lenses prescribed in the United States are soft lenses.